BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i)
 





 


View by Series
1
2
3
4
5
6
7
8
1M
M2
M3
M4
M5
M6
M8
X1
X2
X3
X4
X5
X6
X7
Z3
Z4
i3
i4
i8
iX

2011 BMW 328i

Owner: justpete   (view justpete's garage)
Last Updated: 12-13-2017
Views: 13337

Rating: 9.00
20161114_143101_resized_1.jpg
Photos - Click to enlarge
20141012_071631.jpg
20141101_140550.jpg
20141101_140714_3.jpg
20161116_225813_resized.jpg
20161115_134354.jpg
20161114_143101_resized_1.jpg
20161114_143759_resized_1.jpg
20161114_143821_resized_1.jpg
20161114_144010_resized_1.jpg
General Details
Year: 2011
Model: BMW 328i
Color: Deep Sea Blue Metallic
Transmission: 6MT
Interior seat/trim color: NA/Satin Aluminum
Package Options: Premium Package 2
Cold Weather Package (deleted)
Sport Package (deleted)
Heated Steering Wheel (deleted)
Comfort Access (deleted)
Xenon Headlights
BMW Assist w/enhanced BT & USB (deleted)
Exterior Modifications
BMW Performance Aero Kit
-->CF splitters
-->CF diffusor cover
Seibon CF OEM hood
-->clearcoat
-->locking Aerocatches
---->impact cages
---->remove all stock latch hdwe
Seibon CF CSL trunklid
-->paint to match, fade to clearcoat
Sharkfin antenna delete
-->Replace w'RT GPS antenna
-->delete Telematics unit
S2R Tuning CF sunroof blankoff panel
Interior Modifications
Satin aluminum trim
Max legal tint
Ultimate Pedals
-->frosted anti-slip brake & clutch
-->frosted toe-extension throttle
-->frosted dead pedal
BMW Performance e-brake
OMP Super Quadro steering wheel
-->Krontec quick release hub
OMP HTE-R XL seats
-->OMP low aluminum side mounts
---->modified for more tilt back
-->BimmerWorld seat adapter plates
---->Macht Schnell ASM plates
-->OMP 804F six point harnesses
Rear seats entirely removed
-->Rear shelf lightened
All seat belts removed
All airbags removed
-->SRS module removed
All pillar covers removed
All carpet and underlayment removed
Custom ABS door cards
-->cable door openers
Eight point roll cage welded in
-->Painted white
-->X brace on main hoop
-->harness bar
-->steering wheel hook
-->helmet hook
-->headliner removed
---->mirror & rain sensor removed
-->sun visors removed
-->Purple K extinguisher on roll bar mount
-->Wink 5 panel mirror
CAE Ultra Shifter
-->black w/white plastic knob
-->AKG DSSR
-->Carbon fiber shifter cover plate
Ultimate Clutch Pedal
-->overcenter spring to midpoint
Race Technology DASH3 display
-->wired through dash
Race Technology DL1 Mk3
-->in center console
Safecraft 5# FE-36 fire system
-->nozzles: gas tank, pedals, intake
-->pull handle on side of console
Stack gauges in Macht Schnell panel
-->EGT
-->LSD oil temp
---->controls diff cooler pump & fan
-->Fuel rail pressure
Radio, speakers, amp removed
-->wiring and modules removed
-->BT antenna removed
-->Chime spkr removed
TPMS and sensors removed
-->wiring removed
Comfort Access system removed
Custom new car software load - BMW NA
Performance Modifications
Wheels/Tires:
Apex 18x8.5 ARC-8 ET38 square
-->powdercoated flat white
Toyo R1R 255/35ZR18 @ 28psi
Turner Motorsports race studs
12mm Vorshlag front spacers
5mm Vorshlag rear spacers
Suspension: Race neutral tuned AST 3-way adjustable struts and divorced coilovers, metric Swift springs: 9 and 12 Kg/mm (503 and 671 lb/in) with rear helper springs, BMW PS upper rear shock mounts, 559mm ride height, 3" ground clearance, 5/8" rake at jack points, corner balanced, Vorshlag camber plates at max positive caster, -3.5* front camber, -2.5* rear camber, 1/16" total front toe-out, 1/8" total rear toe-in
Engine/Drivetrain Modifications:
Weight reduced to ~2900lbs, curb wet
-->2930lbs unladen
3-stage intake manifold
Rev Motorsports silicone intake coupler
VAC oil pan baffle (customized)
Supersprint headers
-->Cradin CI-528 coated
-->ThermoTec wrapped
Supersprint midpipes
BMW Performance Intake
AFE scoops
Riot Racing bored throttle body
BPC Alpha-N race tune
-->IAT replaced MAF sensor
-->TBDrwhp increase over baseline
---->baseline w/PI & PE only
AKG 75D Shore urethane engine mounts
ATI Super Damper
UUC red trans mounts
-->Enforcer Cups
Clutchmasters 850
-->stand type
-->dual rigid disc
---->6-pad sintered organic
-->billet flywheel
---->replacable friction surface
-->17lbs lighter than stock
CDV delete w/Zeckhausen part
Red Line MTL
Turner Delrin bushings/mounts
-->rear subframe
-->differential
Diffs Online 3.91 LSD
-->cooler bungs welded to cover
-->85 lb-ft static lock
-->30/90 ramps
-->(4) clutch plates per axle
-->Red Line Shockproof Lightweight
-->Red Line Friction Modifier
135i front calipers
-->Stoptech pistons, seals, boots
-->Delete weights
-->Pagid RS29 pads
-->RacingBrake floating rotors
-->F30 shield plates
-->Stoptech lines
e46 M3 CSL rear rotors
-->135i rear calipers
-->Pagid RS29 pads
-->e46 M3 parking brake shoes
---->welded over stock shoes
-->Stoptech lines
Torque RT700 brake fluid
Vorshlag camber plates
-->caster set to max positive
-->Strut towers clearance ground
M3 front control arms
BW/Aurora PR upper rear links
M3 rear lower camber link
Rogue Engineering toe arms
-->Aurora Performance Race ballends
Bimmerworld spherical bearings
-->inner spring arm (welded to subframe)
-->trailing arm
-->upper front control arm
ZSP front ARB
-->BMW Group N bushings
-->TMS adjustable end links
OE rear ARB and bushings
-->AKG adjustable end links
M3 strut tower brace
Ultra Racing 335i strut tower cross-bar
-->under M3 strut tower brace
Ultra Racing chassis stiffeners
-->One on front subframe
-->Two on rear subframe
BimmerWorld differential cooler
-->BMRS lines and fittings
-->Mounted in trunk cargo well
-->Temp sensor in differential
-->Thermostatic control via Stack gauge
Gut trunk
-->Braille 21# battery
Custom C&R drop-in radiator
-->Samco silicone hoses (custom)
-->coolant temp sensor below return
-->uses stock fan assembly
N55 oil filter cover
-->Setrab 619-7612 oil cooler
---->335i wheelwell liner
-->RB Turbo thermostat delete plate
-->Improved Racing thermostat
---->BMRS lines and fittings
-->Oil pressure sensor on BW block
-->Oil temp sensor on BW block
-->Accusump
---->2qt
---->EPC valve
---->Mounted in passenger floorboard
PLX AFR & EGT sensors
-->In same header as Stack EGT
---->PLX DM-6 in shifter cover plate
Exhaust: PE merge welded to Supersprint midpipes, 17"x4.5" glass packed Burns muffler, thinwall 304SS to reverse merge with original PE tips welded on for stock look
Future Planned Modifications
Euro bumper carriers


All times are GMT -5. The time now is 06:48 AM.




1addicts
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST