View Single Post
      01-24-2012, 09:30 AM   #8
Major General
roundel335's Avatar

Drives: 13 335i Sedan, 16 228i Cabrio
Join Date: Apr 2010
Location: Leland, NC

iTrader: (2)

Garage List
Originally Posted by Greenkirby21 View Post
your second exhaust tip seems to be hanging low D:
That would be pretty much impossible - since the 128 PE is a one-piece muffler with the tips welded on at the factory, and it uses the factory mounts. Put the two units side-by-side and they're identical except for the larger polished tips and lack of a flapper valve on the PE. The mounting rods are exactly the same. Note that there is a slight curve to the rear bumper, particularly to the cutout in the center section/diffuser. The PE and the stock muffler tips both follow this curve; if not, the inner pipe would appear closer to the top of the cutout.

2013 F30 335i M-Sport 8AT/MPE/MPPK/JB+, 2016 228i M-Sport Cabrio 8AT

Last edited by roundel335; 01-24-2012 at 10:14 AM.