Looks like I'm all set with the CP install but I did have one last question and that was regarding the OEM vacuum hose/BOV connection. I can barely get the OEM vacuum line onto the Tial nipple. I'd say I'm about a 1/4" if that on the nipple. I tried heating up the line for additional movement but this thing isn't budging.
EDIT: I went out today and purchased a larger diameter vacuum hose but I'm not sure if I can pull the OEM hose out of the manifold without damaging something. Any advice?
'13 Mini GP #485 of 500
Last edited by Strongbark; 04-09-2012 at 09:08 AM.