View Single Post
      07-18-2012, 09:44 AM   #715
TheSt|G
Resident Tamed Racing Driver
 
TheSt|G's Avatar
 
Drives: 911, 130is, E39 M5, E36 M3
Join Date: Mar 2008
Location: Outside Philly

Posts: 3,726
iTrader: (2)

Quote:
Originally Posted by deterministic View Post
My other concern is about the rubber seal on the top of the light, in mine it seems that there is a slight gap between the rubber and the plastic on the very top ridge of the light, which during heavy rain (I live in Florida) seemed to allow some droplets of water to collect on the inside of the light at the very top.. is it possible that I over-tightened the nuts and caused the rubber to pull away from the seal?
I had the same thing which allowed a small bit of water into the light. I took it off, dried it out, and used butyl tape from door vapor barrier seals to fix it. Worked perfectly.
__________________
130is MSport 6MT/ SuperSprint Headers & Exhaust with Swain Tech Race Coat / DISA Manifold / EVOLVE Tune / TCK DA Coilovers / Euro CF Intake/Box / BMW v1 Wheel / BBS RGRs with PSS / F30 Brake Shield / BMW CF Spoiler & Diffuser / Blackline Tails / Rear Fogs Enabled / Front Fogs Delete / CDV Delete / BMW Black Kidneys / M5 Illuminated Knob / BMW Stripe
TheSt|G is offline   United_States
0
Reply With Quote