View Single Post
      07-29-2012, 07:57 PM   #5
Bdh821
Major
16
Rep
1,261
Posts

 
Drives: 2011 335i xdrive, 2012 Z06
Join Date: Feb 2008
Location: MA

iTrader: (3)

Send a message via AIM to Bdh821
I have HPAutowerks Koni/swift coilovers and apex arc8s 18x8.5" et45 with 225/40/18s star specs on the front. I have my coilovers adjusted so the top of the tire is flush with the bottom of the fender. There was about 1mm of clearance between the coil adjusting screw and the sidewall of the tire. I'm currently running 235 star specs with a 10mm spacer. If I could do it all over again, I'd get the arc8 18x8.5 et38s, for the front. I'm also running with 2.4* or negative camber from M3 control arms and Dinan camber plates. Hope this helps