Originally Posted by ethanh8791
I have the guide for 1 series front bumper removal - assuming it is probably pretty similar on the 1M? Any experience with removal and advice for me?
I have taken mine off, it is pretty straight forward, there are a bunch of 10mm bolts on the bottom, 4 torx bolts on the top.Once you take all of those off, the bumper has tabs on the top corners that clip into black plastic receivers. Be carful with those, they look easy to snap. I used an old credit card to depress the wedge bit on the tab and it slid out with a little pulling. I took some photos, I'll see if I can find them for you.