Originally Posted by Dackelone
The gearbox has a drain and fill plug/hole. The diff ONLY has a fill hole... so you need something to suck out the old fluid.
I used a vacuum/pump (see that blue on in my thread bellow) to add fluid into the trans. It has a long clear hose on the end... so you can fit the hose up next to the trans and car body to add new/fresh trans oil into the gearbox.
Check out my DIY.... post #70
Sweet thanks for that
Hmmm you gearbox took 2.0 and your diff took 1.2. Better confirm what mine takes i would think they would be similar if not the same.
Originally Posted by kmli5
harold performance lube, Google it, say Ken recommended you. he will look after you.
Thanks Ken roughly what did your gearbox take 2L as well ? Also if you have done the diff what did that roughly take ?