Originally Posted by Adam135
So we need 150 degrees for front and 180 degrees for rear??
I would order the ones from superbrightleds if I knew they wouldn't hyper flash or cause CANBUS errors. I think I'll take your advice and wait for them.
The back and front turn indicators are the same with offset bayonets. So if you are waiting for the MyLitCo LEDs, just order 4. I can assure you there are NO CANBUS errors with these. Remember that all the manufacturer does is wire in a 1 cent resistor between the positive and negative that reduces the power going to the LEDs so they don't overheat etc. That way the Bimmer CANBUS system reads them as bulbs ... and all is well.