View Single Post
      01-05-2013, 02:24 AM   #1
vino007
New Member
 
Drives: 2008 135i
Join Date: Jul 2010
Location: blainville

Posts: 8
iTrader: (0)

FS: Stett Charge Pipe w/ Tial Blow off Valve N54

BIMMERPOST / Classifieds
Asking Price:
Sold
Location:
✓ Will Ship
Item Interest
Selling my Stett Charge Pipe with Tial Blow off Valve reg 600$ + shipping + taxes
i am asking for 350$
it is used but in perfect working condition
i am from montreal but i can ship anywhere...
for 135i / 335i N54
514-247-8466
Vinh

also selling JB4 and Active Autowerke Downpipe

http://www.shop.stettperformance.com...ttBOVPipe2.jpg

Item #: SP11-220180

The factory plastic charge pipe and diverter valves are prone to leaking under stock boost levels, increasing boost only makes this problem worse. The stock diverter valves are not designed internally to handle added boost pressure. They can fail under load which will actually cause boost bleed off when you don't want it causing boost spikes and loss of horsepower. The STETT Performance N54 135i/335i charge pipe is made from 100% 304 stainless steel and designed to handle higher than stock boost levels without leaking thanks to it's very strong design, ultra high quality materials and our patent pending throttle body connector that forms an ultra tight seal and prevents the charge pipe from blowing off as is so common with other products on the market. The factory plastic piece begins to leak on even stock level boost. Simply using a standard silicone hose connector to connect an aftermarket pipe leaves a high chance the pipe will blow off the engine. We, however, developed a patent pending 4 ply, double layer hose connector to the throttle body which is far superior to anything else on the market including the factory flimsy o-ring and lock clip. Each kit comes with everything you need for installation including the billet aluminum BOV from Tial, one of the most respected names in the industry. Each pipe comes standard with dual stainless meth bungs.

Proudly made in the U.S.A.
Sound Clip: HERE

- 304 stainless steel replaces factory plastic

- Ultra high quality and strong materials

- Eliminate leaks caused by weak factory connections

- Get back horsepower lost from weak factory diverter valves

- Our patent pending hose connector eliminates pipe from blowing off engine under load

- Dual stainless Meth bungs

- Extreme Duty silicone hoses

- High strength stainless hardware


Last edited by vino007; 05-18-2013 at 11:55 PM.
vino007 is offline   Canada
0
Reply With Quote