View Single Post
      03-04-2013, 08:34 AM   #19
Kind of a big deal

Drives: an 1M not often enough
Join Date: Jan 2011
Location: between Unlimited and Hard to Get

iTrader: (0)

The original attached pin connectors are a bit wide and I don't want to drill such 'big' holes in the boot's top ring. Thus I'm cutting off the original pins and after wiring back into the boot will reattach with OEM pin contacts using crimp pliers:

61131393703 Terminal pin MQS ELA 0.2-0.5MM˛ /SN (delivered 2x as part of 25112284205)
61138366269 Terminal pin MQS ELA 0,5-0,75MM˛ /SN (If you need to connect two wires to 1 pin).

Last edited by eeghie; 02-07-2014 at 06:49 AM.