M3 rear toe links on Non-M?
From what I have read on the forum, nearly all of the suspension arms and links from the M3 can be fitted to the Non-M version. So it means the upper and lower camber links, the trailing link and upper guide rod all have same dimensions as the stock parts on the 135i, correct?
It seems the only exception is the rear toe control rod which is shorter on the M3 than the 135i. Has anyone considered having the rear sub-frame modified with a new anchor point so the M3 toe control rods can be used. Maybe this will avoid the tendency for rear wheels to toe-in as the suspension is compressed and reduce bump-steer.
Last edited by John_01; 05-03-2013 at 04:46 AM.