Thread: Window issue
View Single Post
      01-08-2014, 08:17 AM   #7
KNTDRV
Private
KNTDRV's Avatar
Canada
0
Rep
96
Posts

 
Drives: '08 128i SGM 6MT
Join Date: Apr 2013
Location: GTA, Canada

iTrader: (0)

This worked for me...

Here's the procedure I followed: (copied from a previous thread)
Initialization comprises:
Erasure of initialization
Reinitialization

An initialization must be performed:
In the event of malfunctions, e.g. no one-touch control function, no opening or if available no comfort function is possible
After the power window drive has been replaced
After work is carried out on the power window mechanism
After a power supply interruption, e.g. disconnection of the battery or disconnection of the power supply to the door
After the door window glass has been removed and installed or replaced
After adjustment work on the door window glass
After adjustment work on the convertible top
After replacement of seals

Erasure of initialization:
Open door window glass fully
Operate power window switch in "Open" position four times within 10 seconds

This erases initialization of the power window, anti-trapping protection and toll function are inactive.
Check whether one-touch control (toll) function is inactive, otherwise repeat procedure.

Reinitialization:
Avoid a break between the two steps!
Open door window glass fully
Operate and hold power window switch in "Close" position (second switch stage)
Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer
Open door window glass fully
Operate and hold power window switch in "Close" position (second switch stage)
Once the upper end position has been reached, hold power window switch in "Close" position for approx. 2 seconds longer