Quote:
Originally Posted by hungrybreadbutterhustle
Update:
The plot thickens (get's worse):
1. I just had the lady friend turn the wheel while the car was running and absolute zilch movement from BOTH driver and passenger.
2. I dried out the moisture from the passenger side (low-heat lamp/fan) and then swapped the working bulb from the driver's side over to passenger — still didn't light up. If the control unit was fried, would it still at least light the bulb or does that also effect power to the bulb?
|
If you have a headlight malfunction your adaptive headlights will not work from either side.
I had the same problem, most likely your ballast(control unit) is dead. I would remove the passenger light assembly to make sure it's completely dry. Then remove the ballast from the bottom and check for moisture and corrosion. Good luck