04-27-2010, 04:33 PM
Drives: E30 M3, F10 M5
Join Date: Jun 2009
Location: Bay Area, CA
18" APEX ARC-8 wheel Group-Buy Round #2 ($100 OFF + FREE Shipping)
18" APEX ARC-8 Track Wheel Pre-Order Group Buy Round #2 Now Open!
ApexRaceParts.com - Aftermarket Performance EXpress
All members receive $100 OFF the set price plus FREE SHIPPING within the 48 states.
Alaska, Hawaii, and international buyers receive a $75 shipping credit
This Group Buy is open from April 23rd.
The official close date, and last day to sign up is May 14th.
These pre-order wheels will be arriving in early to mid June.
These wheels are Flow-Formed (roll-forged barrel) and available in 4 popular finishes.
The low offset wheels have a deep concave face. Strength is a priority so the load rating has been set to 703KGS.Weights ranges from 18.2lbs to 19.95lbs depending on size.
All the 18" wheel barrels were modifed in order to clear a stoptech 380mm BBK.
Camber plates are a MUST to run anything larger then a 225/40/18 up front
18x8.5" and 18x9.5" fitment is recommended but two highly modified cars are running the 9" front wheel
Recommended tire sizes for the front on the 8.5" rim is a 245/35/18. 255/35/18's can be used but a front fender roll may be required depending on tire model/brand
The rear can easily accomidate 275/35/18 tires
Note that wide rear tires will contact the inner subframe while car is jacked up off the ground.
This is not an issue at all and there is plenty of clearance once the suspension settles.
GroupBuys are now open on ApexRaceParts.com for all 5 wheel sizes
You can go Directly to our GroupBuy section by CLICKING HERE or on the wheel sizes listed below
Three 1 series fitments are available:
18x8.5" et38 - 18.45lbs - normally $289 - Group Buy Price: $264
18x9.0" et42 - 18.65lbs - normally $299 - Group Buy Price: $274
18x9.5" et62 - 18.20lbs - normally $314 - Group Buy Price: $289