View Single Post
      08-09-2010, 07:05 PM   #4
Drives: SGM 135i 'vert
Join Date: Feb 2008
Location: Sharks Territory

Posts: 1,455
iTrader: (3)

I had the same problem when I installed camber plates on to the stock shock/springs. I have installed Konis before and they are easy to pull out. The stock shocks are incredibly hard to get up to the right spot even with the stock spring fully compressed. I could not do it. The guy I took it to at the corner gas station shop could not either. I eventually dropped them off at an excellent independent shop near work and they were able to get the springs and shocks back together. I have no idea what they did though.
nordique14 is offline   No_Country
Reply With Quote