Quote:
Originally Posted by maxnix
I think you were correct the first time. Looks like passenger side to me.
Should be easy to tell if you cover each one at a time.
|
Yeah, one of them must be off. Now I lowered the pass side a bit and raised the driver side another bit, so the left cutoffs are now aligned. However, the diagonal and right cutoffs seem to be off, and also both beams seem to be way too close together. Any opinions or other pictures for comparison?
Thanks.
P.S: This photos were taken aprox. 25ft from the wall. (yeah, a bad wall to take these pics... I was a bit hurried, I'll try to upload better pics later, but I think these will do for now so you can get an idea...)