Quote:
Originally Posted by AW128i
Perfect. Change your VO to include the xenon lights (this will automatically add the auto-leveling, too), code out the auto-leveling, code the car to use the halogen high beams, and then make a small wiring change inside the headlights to wire the bi-xenon shutter to the halogen high beam. There you go, functioning bi-xenons. You can also code the car to use the corona rings as the DRLs, if you want.
|
just wondering, if you code for halogen highbeams for the xenons won't you get a bulb out error because the high beams in the xenons is just the solenoid which draws little power