Quote:
Originally Posted by 135i_vs_
Regarding the emmisions, there is a way you have to prepare the car to pass inspection. All monitors have to be in "Ready" mode. If any is "Incomplete", it will not pass inspection.
To get a tuned car in ready mode, the piggy back needs to be turned off, the car needs to be driven about 100 miles and have at least 3 start/off cycles. I would connect a scanner and confirm all modes are in "Ready" mode before attempting to get an inspection.
|
Posted this in another thread:
Quote:
Originally Posted by HondaGoneRogue
^^Correct
Also, make sure that once you have the tune off (so it doesn't blind your sensors) you complete a drive cycle to get all your sensors reading again. If you don't do this, your car will be rejected by the inspection machine.
Follow the directions here: http://www.e90post.com/forums/showthread.php?t=365042 |