Quote:
Originally Posted by JDamian
I believe if you go with the SS Section 2 and PE you'll have to make 2 cuts. The Section 2 ends about 1 foot from the exhaust so you'll have to reuse 1 foot of stock piping between the end of the Section 2 and the PE inlet. This also requires an additional clamp. I just ordered my Section 2 and am debating whether to take it to a shop or make another cut and order another clamp. Look at part 985806 in the pic. That 1 foot piece is provided if you buy the SS exhaust. If you go with the PE that will be the stock pipe you will have to cut out and re-clamp at both ends.
|
Got it. Thanks for the feedback.