You need the following to work on this car:
1) PATIENCE!!
The rest is easy as it can be bought...
Torque wrenches for light torque (inch lbs) and heavy torque (100+ ftlb)
Powerful adjustable impact gun, electric or pneumatic (not needed for most things but will make removing some fasteners a lot easier)
Lithium electric ratchet / electric drill (not NEEDED but will make your life 1000x easier than spinning ratchets)
Low profile jack
Jack stands
Wood for jacks / jack stands to support stuff without damage
Tool box (essential, you must have one)
Metric sockets deep and shallow
Extenders, U-joint, adaptors from 1/4-3/8-1/2
Ratchets in the above sizes
Wrench set in metric, preferably with ratcheting end
Screwdriver set
Rubber mallets
Dead blow hammer
Pliers set (needle nose, regular, channel lock, vice grip)
Torx socket, allen keys, polydrive for some more exotic stuff
Female torx sockets
Microfiber towels, spray wax, some sort of degreasing cleaning agent for the really dirty stuff
Nitrile gloves unless you like filthy hands
Even with the above you'll get really dirty so Fast Orange with pumice to clean your hands after the fact (don't fuck around with anything else this is an essential purchase)
|