Quote:
Originally Posted by BMW86
Hey Bryce, can you post a DIY for the AR oil catch can? Cheers.
|
cheers,
i didn't make a diy when i installed my ar occ. it's simple enough, however, that you should be able to do it. i try and explain it in a few steps:
-remove cowl
-remove engine cover
-locate pcv valves, there's two on the passenger side of the engine compartment (edit- i don't know how AU cars are setup. it's the left side if you're looking at the car from the front)
-you have to remove the "blocks" from the pcv valves, it's easy enough
-run the hoses over the engine and towards the front of the engine bay
-attach the occ to the power steering fluid resevoir.
-insert and clamp down the hoses. use the arrows on the occ to figure out which attachments to put the hoses on
-put cowl back on, you're good to go!
-check occ every few weeks for oil, drain as necessary
sorry that i don't have pics, it's really pretty simple though.