|
I dunno.
That diagram to me reads: check when cold (which is what the guy in the video said he did - or rather he said never check when hot), the min cold level will be when the float is even with the top of the threads and the max cold level is when the float is popping out an inch or so.
The diagram says nothing about the max level being a 'hot level'. Even the owners manual page you included says (on step 3) the level is correct if it is between the min and max marks... Which to me reads, if it is at the min mark you are barely okay, so add some fluid. the guy in the video says this as well.
|