BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i) - View Single Post

Clovef · 06-29-2012, 09:43 PM

I just got ohlin coilovers and vorshlag camber plates. I am running a 45 offset 18" wheel with 235/40/18 star specs. The fires are rubbing on the strut Hightower adjust tubes with 2 degrees camber.

I tried loosening the three nuts on the strut tower jacking up one side and pushing or pulling the wheel but it would not budge. I took off the wheel and pulled on the strut. I think I may have gotten it to move the bottom inward which is the wrong way right? Help this is supposed to be easy.

06-29-2012, 09:43 PM	#1
Clovef First Lieutenant 33 Rep 332 Posts Drives: 2011 135i DCT Join Date: Nov 2011 Location: Earth iTrader: (1)	Help adjusting camber plates I just got ohlin coilovers and vorshlag camber plates. I am running a 45 offset 18" wheel with 235/40/18 star specs. The fires are rubbing on the strut Hightower adjust tubes with 2 degrees camber. I tried loosening the three nuts on the strut tower jacking up one side and pushing or pulling the wheel but it would not budge. I took off the wheel and pulled on the strut. I think I may have gotten it to move the bottom inward which is the wrong way right? Help this is supposed to be easy. __________________ 2011 BMW 135i DCT M Sport, black sapphire metallic,Coral red tint, black line tail lights, back grils, BMW Performance spoiler, Apex ARC8, 235/265 Dunlop ZIIs, Ohlins coilovers w/ Swift springs, M3 front bits, Whiteline rear sub frame bushings, Vorshlag camber plates, Stoptech pads, stud conversion, spacers, bms intake
	Appreciate 0 Tweet Quote