[fredy]

Originally Posted by LinkA8A0A

I took the BOV off and apart and noticed a few things. The first is that the spring is uncolored, therefore according to Tial's website this is the 10 lb spring on the Tial Q.

The second thing I noticed is that when I took the spring cup assembly out of the housing, the o-ring at the bottom (circled in yellow) stuck to the housing a bit. I was wondering if anyone has had any success in putting a light coating of grease on here? I can't really see any adverse effect this would cause.

Take a look at the pictures of the disassembled BOV for reference.

Thanks!

yes grease the o-ring

http://www.1addicts.com/forums/showt...ghlight=tial+q