View Single Post
      05-19-2009, 10:56 PM   #9
spdrcr
First Lieutenant
Australia
13
Rep
356
Posts

Drives: Lotus Elise
Join Date: Mar 2007
Location: Sydney, Australia

iTrader: (0)

Quote:
Originally Posted by Templedogg View Post
Very nice write up and pics!!!

The only things different for me was I was able to change both front pads with only taking out the T-40 holding bolts on one side of the front caliper and that gave enough room to angel and slide in the pad for the side with the bolts still on, then insert the other pad, hold in place, and reinstall the T-40s. And actually I was able to use the original backing plates on the front and one of the two on the back without issue. I did not experience or hear the pads shifting during bedding. I will look and see if they are up against the pins and report back.
Can you explain again how you did this. I can't see how its possible to get the pads in through the holes in the top of the caliper...
Appreciate 0