Quote:
Originally Posted by Qbrozen
Wheels:
Front and Rear ASA AR1 18x8 et40
Tires:
Front Accelera Phi 235/45
Rear Accelera Phi 255/40
Suspension and Mods:
Stock. Removed nipples and pushed fronts as far negative as I could.
I'm a bit surprised and confused, as this isn't nearly as aggressive of a setup as some on here, but these do not fit on the front nor rear. Yes, I went a bit taller, but that's not even the problem. They stick out too far. I even tried the 235s on the rear along with stock front just to see what would happen, and the 235s are still to wide for the rear (rubbing on lip). I could probably get away with the 235s on the rear with a fender roll, but I certainly didn't buy these wheels with the intent of only running narrow tires.
|
Unfortunately the offsets are too aggressive for the tire widths you want to use. You tires are bigger in diameter than stock by about 24~30mm, which by itself will already be a problem for the front wheel arches. On those rims you can probably fit 225/40/18 front and 245/35/18 rear, but even that will be close. Its too optimistic to attempt 235 on the front at ET40 without camber plates. 255 rears at ET40 is generally a no-go. I'm sorry to say it.