Quote:
Originally Posted by ASPEC135i
For your reference...
I was able to fit 245/40/18 yoko advan ad08 up front with very minor rub (only on BIG dipped sweeps or very abrupt raised bumps - inside of fender) - lowered on kw sc (fender jusssst above tire) - alignment pins drilled out - camber maxed, no camber plates
I have since raised the car all around 0.75cm w/ alignment. Absolutely no rubbing
|
thanks for the info!
Quote:
Originally Posted by fourtailpipes
not to create a digression here, but it's worth noting that 245/40-18 is too tall. 245/35-18 is the proper diameter.
|
agreed that for a non-rubbing config, 245/40/18 is too tall (25.7" Dia), whereas a 245/35/18 or 235/40/18 are both < 25.3" Dia. It's just a question of how bad the rubbing will be...I'm more ok w/ it rubbing on the fender liner occasionally, as long as it's not on the strut or fender.