If you guys means by "cornering light" the front flashers (orange)...
I did as follow:
- jack the front end (to have more room)
- there is a trap in the car front wing (above the tire/front end)
- open the trap with a flat screw driver
- there is like the "ass of an arrow" in plastic
- you need to unscrew it (like a fraction of a turn, maybe 1/8 of a turn)
- pull it out
- your light bulb is in it
- you need to push it a little as you turn it about 1/8 of a turn to free it
Installation suggestion...
Turn the lights on (seems like if you turn the plastic "ass of an arrow" holder, it might over shoot and will not light up. So by doing it with the lights on, you will be sure it is ok.
For the lights in the sealed beam, I did replaced one once. There is a trap behind the head lights. It is held in place by to metal clips. So you just have to flip the 2 clips and open the trap.
Last edited by QuebecDIY; 11-26-2018 at 09:14 PM..
|