Completed installation this evening. Took about 1.5 hrs. Would take about 30 minutes or less the second time
Everything is very straight forward and it's a fun tinker around job. Only thing which gave me grief was the rear divereter valve which needs to be temp disconnected. Have to turn a grey fitting which I finally pushed with a flat head screw driver to loosen up. Other than that easy job. Will check in 3 months to see what's produced! The pcv flapper assy had some oil in it so looks like this catch can will be needed on my car. Dropping oem intercooler tomorrow and very curious if it's oily too.