|
Did the driver's side on a 09 135i. End of the cable had come off. It was not a bad job. Took a couple hours. Not too long to save about $350.
I have noticed that when closing the door and the window raises itself back up to tuck under the lip, it is not going fully in there (as compared to the other window) so it is making noise a bit on the hwy. I guess maybe there is a a bit of adjustment that can be attained when tightening the glass down so maybe I need to try and raise the glass up a bit and retighten it back in to hopefully raise the glass just the tad that it would need to tuck under the lip when it raises itself back up after closing. I doubt there is any way that it is from setting the limits wrong... Anyone have an issue or insight into this?
|