Quote:
Originally Posted by RimasRS
Sorry for bringin it back but can you please share/instruct exact steps to disable RDC and enable RPA on US spec e82.
Would really appreciate that...
|
I was able to do it on my CIC X1 using the steps provided by a fellow member:
Quote:
1) Disable/disconnect physical TPMS RDC module. (In a 135, it's on the right side by the battery behind the side cover.)
2) Code OUT $2VB and ADD IN $265 in the VO.
3) Change the following codes in CIC, KOMBI, and XDSC:
CIC: RPA_CIC
aktiv
CIC: RDC
nicht_aktiv
CIC: RDC_SAFETY
nicht_aktiv
KOMBI: RDC_ALIVE
nicht_aktiv
KOMBI: MMI_ENA_RPA_RDC
aktiv
KOMBI: RDC_VERBAUT
nicht_aktiv
KOMBI: DSC_MIT_RPA_CC
aktiv
KOMBI: RDC_DISP_SWITCH
nicht_aktiv
XDSC: AUSSTATTUNG_RPA
aktiv
|
However, my '08 135 is giving me an issue. Of all the modules I can read (which is all of them), only the Kombi has any references to RPA (specifically MMI_ENA_RPA_RDC and DSC_MIT_RPA_CC).
Neither the Cappl, DSC, nor any other module has any other references to RPA.
The Cappl has CCC:RDC, but no CCC: RPA code line.
If anyone has any idea if/how it is possible to activate the RPA on a CCC car, please let me know. I can see "FTM" in my nav menu, but it's grayed out.
Thanks!