[dmytro98]

So when I originally bought this I knew I was going into uncharted waters but I wasn't expecting it to be that bad. I couldn't find any sort of documentation on the unit and even the paperwork included references the V1. The way I was able to get any sort of help was from reaching out to the Mfactory account on here. So lets get into what I found after looking at it myself and hopefully make this a little easier for anyone else that wants to purchase this unit.

What's included
-8 25D ramps (8 installed on acceleration side)
-16 35D ramps (8 installed on deceleration side)
-8 45D ramps
-4 0D ramps (only need 4 to set diff as a one way)
-12 Springs (6 installed for 55lbs of preload)
-20 clutches (18 engaged for 90% lock)

What Configuration I'm Going to Run
-25D Ramps for acceleration side
-45D Ramps for deceleration side
-12 springs for 110 lbs of preload
-all 20 clutches engaged for 100% lock

This is also going into a manual 128i that's primarily for track use and occasional canyon drives. I'll add pictures of everything later on as I'm at work right now.