No special tools needed... Here is what
DriveHard showed us how to calibrate the SZL sensor...
Post #7
http://www.1addicts.com/forums/showthread.php?t=504482
HOPE YOU READ THIS BEFORE YOU G BACK..
sit in car,
start engine,
have steering wheel in straight ahead position
without pausing, turn wheel slowly all the way to the left and pause at the end for a second or 2
without passing, turn all the way to the right and pause at the end for a second or 2
repeat the last 2 steps and end in the straight ahead position.
turn off car, wait a minute, restart, and drive away for a few hundred feet.
you just calibrated your SZL ( steering wheel sensor to tell dsc if wheel is turned and to what degree)
other lights come on by default.
Good Luck...
________________