Just to be sure, if using accessory fuse slot 8, which is 20 amps, does this mean you need two 10 amp fuses to plug into the two slots on the adapter that we connect to the valentine one power unit?
Or do I use one 20 amp fuse that is sitting in the slot on the fuse panel already and leave the other slot empty on the adapter referred to above?
Does it make a difference, or will the circuit not be closed if both slots not filled?
I note that the adapter has a 3-10 amp max, so will this create any problem with circuitry (if originally it's 20)?
In addition, isn't it incorrect to use this adapter on a circuit that is 20 amps (#8), if the adapter is rated only for maximum 10 amps??? Shouldn't we be using a 10 amp max circuit...and if so, which ones have you all been using that are switchable and do not drain battery when power/ignition is off???
|