BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i) - View Single Post

eeghie · 03-04-2013, 06:34 AM

The original attached pin connectors are a bit wide and I don't want to drill such 'big' holes in the boot's top ring. Thus I'm cutting off the original pins and after wiring back into the boot will reattach with OEM pin contacts using crimp pliers:

61131393703 Terminal pin MQS ELA 0.2-0.5MM² /SN (delivered 2x as part of 25112284205)
61138366269 Terminal pin MQS ELA 0,5-0,75MM² /SN (If you need to connect two wires to 1 pin).

03-04-2013, 06:34 AM	#17
eeghie Kind of a big deal 300 Rep 1,674 Posts Drives: an 1M not often enough Join Date: Jan 2011 Location: between Unlimited and Hard to Get iTrader: (0)	The original attached pin connectors are a bit wide and I don't want to drill such 'big' holes in the boot's top ring. Thus I'm cutting off the original pins and after wiring back into the boot will reattach with OEM pin contacts using crimp pliers: 61131393703 Terminal pin MQS ELA 0.2-0.5MM² /SN (delivered 2x as part of 25112284205) 61138366269 Terminal pin MQS ELA 0,5-0,75MM² /SN (If you need to connect two wires to 1 pin). Last edited by eeghie; 02-07-2014 at 04:49 AM..
	Appreciate 0 Quote