I had some pictures in this thread on my previous installation on the right:
http://www.1addicts.com/forums/showt...ht=garmin+nuvi
The last picture shows me pulling out one of the two screws that holds the gauge cluster in place. You still have to pry a bit with a plastic prybar after you pull the screws. Then there are 4 screws, 2 of which are visible in the next to last picture above to pull the hood off. All are torx.
Also if you are interested, there are several more pictures in the pdf in my first post as well as some potentially useful commentary. My pictures through the windshield didn't come out this time but some of the interior pictures may help a bit too.
Jim
__________________
128i Convertible, MT, Alpine White, Black Top, Taupe Leatherette, Walnut, Sport
Ordered 5/22/09, Completed 6/4/09, At Port 6/9/09, On the Georgia Highway 6/13/09, Ship Arrived Charleston 6/24/09 at 10pm, PCD 7/21/09
