|
So, I pulled all the painter's tape off. The excess goop cleaned up nicely (with a bit of work) using the provided spatula/scraper + betaclean solution.
However, I noticed that both of corners of the CF spoiler didn't adhere properly to the trunk--there was a visible gap, R side > L side. So, I taped off the corners completely, squirted some leftover goop into a zip lock bag, cut the corner of the bag, and went to town on filling the gaps. I eventually had to use some clamps just like the ones in the DYI e90post as I couldn't get the edges to lay flat with just tape/weights. Right now it's all curing AGAIN, so hopefully once it's done it'll looking alright.
Will post back with updates and some pictures once I pull everything off.
|