Hi, Ianc,
There truly, no wires underneath at all. You don't need to worry when do the cutting.
As for the corners, I simply used a narrower blade to cut at 45 degree, which connects the left or right side end and the upper side end. There is no need to cut a round corner at all. The cutting line as showed on the template reserves enough margin. No worry...
The vibratory saw I used is a OEM from a factory. It is as identical as the Chicago, Rockwell one. They are the same.
Quote:
Originally Posted by ianc
Great Video, thanks Larry!
Can you post the specifics of the saw you used for this again? Was it a harbor freight?
How did you cut the corners exactly? Seems like you could only do a square corner with that saw, but the template corners are rounded?
The vid says there are no wires under there; nothing at all to worry about then?
ianc
|