[Eddy@ApexWheels]

18" APEX ARC-8 WHEELS - IN STOCK AND READY TO SHIP
ApexRaceParts.com - Aftermarket Performance EXpress



We now have over 1000+ wheels in stock, including all 4 finishes of the 1 series specific wheel
All orders ship same or next day!

These wheels are Flow-Formed (roll-forged barrel) and available in 4 popular finishes.
Strength is a priority so the load rating has been set to 703KGS.
Weights ranges from 18.2lbs for the rear wheels and 18.45lbs for the fronts.
All the 18" wheel barrels were modifed in order to clear a stoptech 380mm BBK.
Camber plates are a MUST to run anything larger then a 225/40/18 extreme summer tire up front. some less aggressive 235's will fit without issue.
18x8.5" and 18x9.5" fitment is recommended but two highly modified cars are running the 9" front wheel
Recommended tire sizes for the front on the 8.5" rim is a 245/35/18. 255/35/18's can be used but a front fender roll may be required depending on tire model/brand
The rear can easily accomidate 275/35/18 tires, but 265/35/18 is very popular.
Note: that wide rear tires will contact the inner subframe while car is jacked up off the ground, such as r-compounds.
This is not an issue at all and there is plenty of clearance once the suspension settles.

Wheels are available online through ApexRaceParts.com
You can go Directly to our 1 series section by CLICKING HERE or on the wheel sizes listed below

Three 1 series fitments are available:

18x8.5" et38 - 18.45lbs - $289
18x9.0" et42 - 18.65lbs - $299
18x9.5" et62 - 18.20lbs - $314


4 finishes:

Hyper Silver
Hyper Black
Anthracite
Satin Black

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Hyper Black








Satin Black





Hyper Silver





Anthracite







Hyper Black







Satin Black





Hyper Silver







Satin Black



Hyper Black





Satin Black