It is fairly easy to fit the 1m front to a 135i.
You will need:
1M front bumper
1M center grid - vent that covers intercooler
1M headlight brackets
1M fenders
1M reflectors and trim
1M Windshield Washer Reservoir (unless you delete)
1M Bumper ducting
1M Front Fender Liners (2piece per side)
Do note, the 1M fenders will not mate up flush to 135i side skirts. You will need to custom modify a set of 135i fenders to look flush or Run 1M ones and do a rear end conversion as well.
|