I'm using Ground Control Street camber plates with Koni yellow struts. Initially I used them with OE struts, but recently swapped them for Koni yellow. It works because the shaft design is so similar. When ordering Camber plates you will have to specify what brand of strut and spring diameter you are using. The vendor should know which parts are needed for your setup.
If you are firming up the shocks you will need both front and rear in order to balance the handling. Just be aware the Koni yellow rear dampers have to be removed from the car to be adjusted. There is the white TCK version that is more easily adjusted while installed on the car, but costs more unfortunately.
|