|
If the water pump went through the bleeding process then it wouldn't make any difference if you had the fan on max or minimum, as long as it started.
In regards to bleeding itself, you basically run it until you don't notice any bubbles in the system anymore. As Reis said, it looks like you have water pump issues but what I would do is just clear all of the codes and see if they come back. A lot of the time these things can be intermittent and maybe something to do with when you were doing the service and/or bleeding.
I'd also recommended doing the bleed process again just to check there are no bubbles coming out of the bleed valve (I assume you loosened the bleed valve on the coolant expansion tank). Also do it on a battery charger of some kind this time so you don't drain the battery.
|