Suspension tuning for your BMW 1M:
KW Coilover Series - variant 3 (adjustable damper and rebound settings)
31.05.2011 - KW coilover Variant 3 + "inox-line" for the BMW 1er M Coupé
These KW coilover Variant 3 + "inox-line" for the BMW 1er M Coupé are now available. These KW coilover kits could be height adjusted from 10-35mm at the front and 5-25mm at the rear axle.
KW Variant 3 + "inox-line"
part no. 352 20 095
lowering front axle: 10 - 35mm
lowering rear axle: 5 - 25mm
ordering: now possible
delivery: now possible
Improvements trough KW Coilover Variant 3:
- The driving comfort increases significantly when driving slowly (transverse joints, etc.)
- The Variant 3 reaches at higher speeds a harmonious setting between the front and rear axle
- Straight and braking performance improved considerably
- The vehicle is more agile by more compression damping
- Overall, it is easier to move the car quickly: You get more feedback and the handling is much more balanced
Manufacturer site:
http://www.kw-suspensions.eu/int/kw_...Id=4055&Page=0