View Single Post
      02-24-2015, 05:34 PM   #30
fe1rx
Captain
1390
Rep
776
Posts

Drives: 135i, 328i, Cayman S
Join Date: Jan 2008
Location: Canada

iTrader: (3)

Quote:
Originally Posted by aloksatoor View Post
RIght, so bimmerworlds got oem style monoballs for the camber arm in the hub and also the 4 for the trailing arm.
The hub (wheel carrier) has a ball joint for the camber arm already. The Bimmerworld ball joint is for the inboard end of the camber arm and it presses into the subframe.

Quote:
Originally Posted by aloksatoor View Post
Does anyone just sell the monoballs which fit in the guide rod inners and the upper wishbone as well or we are stuck with one mono and one bushing? I looked on realoem but the parts are sold complete with the mono/bush pressed into arms.
You mean the outer (wheel end) of the guide rod and upper wishbone. Any ball joint you pressed in there would have to have the conical end to mate with the wheel carrier. No such thing exists that I know of.

Incidentally, the M3 rear arm ball joints are swaged in as you can see from the following section:

Name:  Rear M Arm Ball Joint.jpg
Views: 6689
Size:  120.7 KB
Appreciate 3