|
So I have some coding updates!
Using NCS Dummy, which is a helper companion tool to NCSExpert, I was able to disassemble the module programming for an X5's Idrive, and enable Video in Motion! For my own car, I successfully tuned the DRLs so I have angel eyes alone in front and nothing at all in back. Looks good. Also increased the angel eye brightness in DRL mode.
Next little projects...
- Change auto turn signal from three to five blinks (also needs a disassembly).
- Change brightness of lights when using the ParkLicht function (this illuminates one side of the car to mark your position on the side of the road, I want to reduce the brightness of the taillight, and use the side marker as the front marker, and turn off the angel eyes).
- Change angel eye brightness at night to be a little more white, when Xenons are on.
- access radio settings using the Can-Most gateway. Would love to have weather and working.
Coding does take a fair amount of research, but once you get going, it is good fun and not really that difficult.
|