Quote:
Originally Posted by muddtt
About 1.5 gallons came out (5.7liters). That was with pan exchange.
I used a thermal gun to measure the area and it was at about 30'C. According to the instructions that should've been the proper temp to fill. You think if I let the engine idle awhile longer it would start dripping out?
|
I think as long as you put back the same amount of fluid as came out... you should be ok.
I think 30'C is too cold to check the fluid level. I thought it was ~80'C. Maybe check with CTSC. In their tranny kits they only supply six liters of ZF fluid, so I think you are ok.
http://www.thectsc.com/products/oil-...--227-109.html