Quote:
Originally Posted by bionicbelly
Thanks for all the input guys. I am going to start with 450 lb springs in the front with 6” length. Keep in mind that the ast’s have the upper perch on the strut shaft.
For the rear, it will be 800 lb 9” springs.
Probably have to play with it a bit, but it seems like a good place to start. FYI- it will be the stock bar in front. Might try a rear bar as well, but I want a torsen lsd, so May leave it off.
|
I use an 8" spring in the rear. a 9" might limit you in how low you can go in the rear but it really all depends on your particular coil over adjuster.