Quote:
Originally Posted by BMW86
It's strange because you haven't thrown any codes so it's hard to diagnose.
I'd try doing these things.
Install and reinstall.
Log some runs, check for codes. Send logs to Terry.
Make sure Auto-clear for codes is off, that might be why you can't see any codes.
Maybe look into changing plugs as it's relatively inexpensive and see if the misfires keep occurring. I doubt it's the problem though.
|
I still throw codes... I just didn't get any when I had the CEL/Limp Mode...
I know this would be the smart thing to do... It's just such a pain in the arse to install the N55 one... It's not just a few ribbon cable in the ECU box...
I haven't really used the JB Software so not an expert on doing logs... Sure I can figure it out though...
Also, I just don't trust it... I actually feel less stressed about life in general with it off my car...
We'll see I guess....