Quote:
Originally Posted by spxxx
Would love to know more about how you mounted the splitter. I used the 2 under body mounting brackets that right in front of the oil pan + 10 points along the bumper. Still feel like I could use more, filmed the splitter at 100mph and saw solid deflection and bending with that much load.
|
I have aluminum brackets coming down from the bumper beam that bolt into a brace on the splitter itself out front. In the back, I have a C channel that the splitter slots into.
I also fabricated wire splitter stanchions to prevent the splitter from sagging at speed in front of the main brace. The splitter doesn't attach to the plastic bumper at all; its all chassis mounted.
I'll try to snap some photos this weekend of the setup.