Quote:
Originally Posted by SpacE82
When you put the lights in, the two LEDs on the lights should be facing up and down so when you lock it in place by twisting it, the two LEDs are facing sideways. When I first installed it, I had locked it and the LEDs were facing up and down, so I changed it, and it made a huge difference.
Look at the lights when you are putting them in, make sure the LEDs are facing up and down because when you turn it to lock them, they have to be sideways. Also, if you look at the inside rings, you can kind of see where the light is coming from (either top and bottom, or left and right side)
Hope that helps..and makes sense haha
|
Facing up and down while putting it in...I'll try that. I thought it could only go in one way. I'll play with it again...thanks..